Air Termination Rods & Acccessories

Air termination rods are made of pure copper. The rods are made with a tapered tip and is always installed on the top portion of the facility to be protected. Air termination rods arrest or attract the lightning strike and guide the energy to ground. Air terminaton rods are fixed on the building with the help of a base.

SIZE Rod Length	MATERIAL	PART NO
15 x 300mm	Copper	EXTPR-15-0.3
15 x 500mm	Copper	EXTPR-15-0.5
15 x 1000mm	Copper	EXTPR-15-1.0
15 x 1500mm	Copper	EXTPR-15-1.5
15 x 2000mm	Copper	EXTPR-15-2.0

Air Terminal Base

Air terminal base, made of gunmetal or brass is used to hold or fix the air terminal rod on top of the building. The lightning protection leads and down conductors are joined to the air rod within the base.

SIZE	MATERIAL	PART NO
16mm	Gunmetal	EXATB-16
20mm	Gunmetal	EXATB-20

Multiple Point

Multiple points are made of copper. The multiple points are fitted with air termination rods. Multiple point with spikes give additional lightning arresting capability to the network.

SIZE	MATERIAL	PART NO
16mm	Copper	EXMP-16

Flat Saddle

Flat saddle, made of gunmetal or brass is used to hold or fix the air terminal rod on top of the building. The lightning protection leads and down conductors are joined to the air rod within the saddle.

SIZE	MATERIAL	PART NO
16mm	Gunmetal	EXFS-16
20mm	Gunmetal	EXFS-20

Ridge Saddle

Ridge saddle, made of gunmetal or brass is used to hold or fix the air terminal rod on top of the building. The lightning protection leads and down conductors are joined to the air rod within the saddle.

SIZE	MATERIAL	PART NO
8mm	Gunmetal	EXRS-08